158
WT334
10. Remove the snap ring securing the ball joint in the A-
arm. Remove ball joint.
WT496
NOTE: Only remove the ball joint if replacement is
necessary.
11. Remove and discard the cap screw and lock nut secur-
ing the sway bar link to the lower A-arm.
WT494A
12. Remove the seals and sleeve and inspect for cracks,
nicks, or tears.
NOTE: Only remove the bushings if they must be
serviced.
13. Place the A-arm in a bench vise and using an appro-
priate tool, drive out and discard the bushings.
WT600
REMOVING LOWER
NOTE: Having the steering rack turned completely
to the left and the clamp orientated as shown will aid
in removing the cap screw.
WT333
1. Remove and discard the cap screw and lock nut secur-
ing the sway bar link to the lower A-arm.
WT494A
2. Remove the front bumper.
NOTE: The front bumper will need to be removed to
remove lower A-arm cap screw from frame.
3. Remove the cap screw and discard the lock nut secur-
ing the lower A-arm to the frame. Remove the A-arm.
