149
FX064
4. Secure the shock eyelet in the vise and insert the nitro-
gen needle. Fully depress the needle to release nitro-
gen pressure from the shock. After installing the
appropriate body cap removal tool, insert the retaining
wire into the groove between the cap and body.
FX063
FX062
5. Tap upward on body cap removal tool to release cap;
then depress the bearing assembly to full expose
retaining wire.
FX061
FX060
6. Using a valve shim, remove the retaining wire and
pull the shaft assembly out of the body.
FX059
FX058
7. Dispose of used oil in an environmentally-acceptable
manner; then use a body clamp block to secure the
body in the vise.
