20
WT485
4. Secure the panel to the frame and pre-filter cover with
the existing cap screws and push pins.
WT488A
WT489A
5. Install the clutch intake tube onto the engine and
secure it with the clamp. Tighten securely.
WT487A
6. Install the left rear fender and secure it with the exist-
ing hardware.
7. Install the tabs of the body panel into the slots in side
panel; then insert the plastic insert into the gas tank
filler hose. Tighten the clamp and install the gas cap.
WT245
8. Secure the panel to the frame with the existing cap
screws and push pins.
WT491A
WT489A
9. Install the right rear fender and secure with the exist-
ing hardware; then install the seats.
