21
WT209A
REMOVING SIDE PANELS
To remove a side panel, remove the cap screws and push
pins securing the side panel to the frame; then remove the
panel.
WT257A
INSTALLING SIDE PANELS
1. To install a side panel, install the side panel tabs into
the front upper side panel slots.
WT211
NOTE: Make sure the bottom of the side panel is on
the outside of the inner splash panel.
WT212
2. Secure the side panel using the existing cap screws
and push pins. Tighten all hardware to 60 in.-lb.
Dash/Switches
REMOVING
1. Remove the steering wheel (see Steering Wheel in this
section).
2. Remove the top steering tilt assembly cap screw and
discard the nut.
WT338A
3. Remove the door latches and discard the cap screws.
WT010
4. Remove the fasteners and push pins securing the dash
to the frame.
