133
TA130
ASSEMBLING HALVES
1. Install the intermediate shaft and idler shaft into the
case only partially. Do not seat the shafts completely
into the case at this time.
TA056
2. With the aid of an assistant and with the gear forks in
position, install the input shaft and reverse shaft with
chain as an assembly.
TA058
TA059
NOTE: Make sure the shift fork pins face the installer.
NOTE: Engage all four shafts before seating them
simultaneously into the case.
NOTE: Ensure the chain stays engaged in the
sprocket teeth.
NOTE: The shift shaft rail should remain un-seated at
this point.
3. Install the shift drum into the case; then engage the
fork tabs into the grooves in the shift drum.
TA062
4. Pinch the forks together and slide the rail into position
in the case.
TA063
5. Install the output gear. Use slight force to seat it and
ensure the gear teeth engage with the intermediate
shaft.
