19
18
Menu operation
Menu operation
PROFESSIONAL
INNOVATIVE BRANDING
SERVICE
PROFESSIONAL
INNOVATIVE BRANDING
SERVICE
1
5
Menu Operation
5.1 Menu Structure
The table below shows the entire menu system at once. Each section will be covered in
subsequent sections in more detail.
There are three levels of nested menu under the Main Screen. The main screen is always the
first screen displayed after the power source is turned on. All sub screens can be accessed
using the front panel keys or touch screen.
Menu
Description
Setting
Power/Sink
Power
Sink
Power+Sink
More Setting
Vdc S/R
Enable
Rise-V/ms
Fall-V/ms
Idc S/R
Enable
Rise-A/ms
Fall-A/ms
Average
SLOW
MID
FAST
CC/CV Prior
CC Prior
CV Prior
Delay Time
HI-Variation
ON
OFF
Enable power mode only
Enable sink mode only
Enable power and sink mode at the same time
Enable the slew setting
Voltage rise slew rate setting
Voltage fall slew rate setting
Enable the slew setting
Current rise slew rate setting
Current fall slew rate setting
Set average time at 200ms
Set average time at 50ms
Set average time at 10ms
Set CC mode in priority
Set CV mode in priority
Set the slew rate of voltage or current contrary to the
selected priority mode.
Enable the internal dummy load
Disable the internal dummy load
Load-2QO
Limitation
Vlimit
Vlimit-H/V
Vlimit-L/V
Ilimit
Plimit-H/W
Plimit-L/W
Rlimit
Rlimit-H/Ω
Rlimit-L/Ω
Protection
Enable
Enable
Delay/s
Set the maximum voltage
Set the minimum voltage
Set the maximum power
Set the minimum power
Set the maximum output programmable resistance
Set the minimum output programmable resistance
Enable over voltage protection
Enable over current protection
Set the delay time
Sink On/Off
Waveform
Ilimit-H/A
Ilimit-L/A
Set the maximum current
Set the minimum current
Plimit
OVP
Delay/s
Range/V
Set the delay time
Set the OVP value
OCP
Range/A
Set the OCP value
Enable
Delay/s
Enable over power protection
Set the delay time
OPP
Range/W
Set the OPP value
Enable
Delay/s
Enable the foldback protection
Set the delay time
Foldback
Range
CV-CC or CC-CV, this function turns off the output when
the output mode is changed
Lock
Lock the front panel keys and touch screen
Enable
Delay/s
Enable under voltage protection
Set the delay time
UVP
Range/V
Set UVP value
