6280 Self-Propelled Scraper
Tech Data
DIRECTIONS FOR USE AND SAFETY INSTRUCTIONS
The 6280 Commander self-propelled scraper is only intended for stripping adhered, soft good
fl oor coverings. Any other use is considered improper.
ATTENTION!
Improper use can cause injury to the operator and damage to the machine.
Read the manual thoroughly before use!
GENERAL RULES FOR SAFE OPERATION
•
Read and keep all instructions for future use - Before use, be sure everyone operating this equipment reads and understands the manual and labels.
•
Disarm machine - Remove cutting blade when machine is not in use.
•
Avoid dangerous environments - Do not use in rain, damp or wet locations or in the presence of explosive atmospheres. Remove materials or debris that may
be ignited by sparks.
•
Dress properly - Do not wear loose clothing. Loose clothing might get caught in moving parts. Keep hands and gloves away from moving parts.
•
Keep work area clean and well lit - Cluttered, dark work areas invite accidents.
•
Check for damaged parts - Inspect guards and other parts before use. Check for misalignment, binding, improper mounting, broken parts or any other condition
that may affect operation.
•
Guard against electric shock - Prevent body contact with grounded surfaces such as pipes, battery plug connections, radiators, ranges and refrigerators. Prior
to scoring or making cuts always check for hidden wires or pipes to reduce shock hazards.
•
Do not force equipment - For best production rates, use equipment properly. Excessive force will cause operator fatigue, increased wear and reduced control.
•
Keep hands and feet away from cutting edges and moving parts.
•
Wear gloves when changing blades.
•
Maintain control - Keep proper footing and balance at all times. Maintain a fi rm grip.
•
Do not abuse cord - Never unplug the machine by pulling the cord from the outlet. Pull plug rather than cord to reduce risk of damage. Keep cord away from
heat, oil, cutting edges and moving parts.
•
Stay alert - Do not use when you are tired, distracted or under the infl uence of drugs, alcohol or any medication causing decreased control.
•
Wear safety glasses, work boots and proper equipment when operating equipment and working in the area with equipment use.
•
Do not “side hill” machine - Operate machine on level ground, never leave machine unattended on an incline.
Product Specifi cations
Width
Height
Length
Weight
Speed
33 cm (13”)
104.1 cm (41”)
69.9 cm (27.5”)
161kg
(354 lbs)
3-14 m/min
(10-45 ft/min)
HP
Amps
Sound Level
RPM
1.5
13 max
78-86 dB
3450
Warning: Silica Dust Warning
Scraping, grinding, cutting, drilling of masonry, concrete, metal and other materials can generate dust, mists, and fumes containing chemicals known to
cause serious fatal injury or illness, such as Respiratory disease, cancer, birth defects, or other reproductive harm. Control dust, mists, and fumes at the
source where possible. In this regard use proper work practices and follow the recommendations of the manufacturer, OSHA, and occupational and trade
associations. When the hazards from inhalation of dust, mists and fumes cannot be eliminated, the operator and bystanders should always wear a respira-
tor approved by OSHA/MSHA for the material being cut.
6280
COMMANDER
SELF-PROPELLED
SCRAPER
Fax: 763.535.8255 USA
