35
34
Parameter ranges are:
Enable,
enables LAN communication mode.
ETH Setting,
Auto, Manual, to set DCHP mode (Auto) or use Manual to assign a fixed IP
address.
IP Addr,
0~255.
Net Mask,
0~255.
Gate Way,
1~254.
Socket Port.
The factory default Ethernet setting values are:
ETH Setting = Manual
IP Address = 192.168.001.100
Net Mark = 255. 255. 255.000
Gate Way = 192.168.001.001
Socket Port = 2001
Menu operation
Menu operation
PROFESSIONAL
INNOVATIVE BRANDING
SERVICE
PROFESSIONAL
INNOVATIVE BRANDING
SERVICE
5.7.1.1.5 CAN Setting
From the Remote Setup screen, press the
CAN
soft key to change CAN interface settings.
Press the [Esc] key when done to back up to the Remote Setup screen.
Parameter ranges are:
Enable,
enables CAN communication mode.
BaudRate,
10K, 100K, 250K, 400K, 500K.
Addr,
0~127.
5.7.1.2 System Setup
The System setting screen is used to configure the following resources of the power source:
●
Buzzer
P/O Sta.
●
P-Out
●
5.7.1.2.1 Buzzer
The buzzer can be turned on or off by switching the setting between ON and OFF.
When ON, a sound will sound each time the user presses a key on the front panel or presses
the shuttle.
If an audible indication is not desired, turn the buzzer sound OFF.
5.7.1.2.2 P/O Sta.
The P/O Sta. function allows the user to select the programmed state of the power source after
turning on the input power. Available selections are:
Rst,
The power source will NOT store any setting when powered off and initialize with factory
default at power on.
Sav,
In this mode, a user-defined setup can be assigned for recall when the power source is
turned on. This means the power supply will always turn on with this specific setup.
Last,
The power supply will store the last setting in effect when powered off and recall this
same setting at power on. That means the unit will power up in the same conditions as when
it was turned off.
5.7.1.1.4 LAN Setting
From the Remote Setup screen, press the
LAN
soft key to change LAN interface settings.
Press the [Esc] key when done to back up to the Remote Setup screen.