Parallel/Series
Searching
Then switch to the main page if the detected number of slaves is equal to expected. The display
on the master unit changes after initialization and all set values are reset. The master now
displays the set and actual values of the total system. Depending on the number of units and
output connection, the total current or voltage and power will multiply.
After power-off, please turn on the Slave first and then the Master power.
Parallel/Series
Slave - Slave1
The slaves can no longer be controlled manually or remotely, neither via the analog nor via
digital interfaces.
Note:
The Salve unit can also be unlocked using the [.] key on the front panel.
6.2 Configuring The Master Unit
Tap on Parallel/Series icon on Navigation page to enter Master/Slave setting menu.
Specify the unit as master with check Master option.
Set Keep After PWR OFF = Yes will save the Master/Slave configuration to a non-volatile
memory. That means the Master/Slave configuration will be kept after power off. Instead select
No to release from this operation mode.
Select the required mode of operation Parallel or Series according to the output connection
mode.
Number of Slaves, Number is all salves in this system and the set number should be the same
as the actual number.
Then press
Search
soft key to start searching for all Slaves. A pop-up will appear and display
the search results.
59
PROFESSIONAL
INNOVATIVE BRANDING
SERVICE
58
PROFESSIONAL
INNOVATIVE BRANDING
SERVICE
