21
20
Menu operation
Menu operation
PROFESSIONAL
INNOVATIVE BRANDING
SERVICE
PROFESSIONAL
INNOVATIVE BRANDING
SERVICE
Menu
Description
Menu
Remote Setup
RS232
RS485
USB/GPIB
Calibration
Set the communication parameters for RS232
Set the communication parameters for RS485
Enable the communication port and set the address
Monitor for external control mode
Product information
Running information of each power module
LCD brightness adjustment
Date & Time setting
LCD screen color correctness test
Calibration from the front panel
Recall original factory settings
LAN
CAN
Ethernet setting
Address and baudrate setting
System Setup
Buzzer
P-out
P/O Sta.
ON (enable) or OFF (disable) the buzzer function
Set the output as last shutdown setting or OFF
Set the power-on parameter
Rst, restore to factory default
Sav, user defined
Last, remain last shutdown parameters
EXT Control
Setup
Monitor
External control mode related parameter setting
System Info.
Run Info.
Config
LCD Setup
Display
Date/Time
Color Test
Other
Recall Def
Warning Log
Firmware Upd
Warning messages list
Firmware update
Menu
Description
Output Mode
List Mode
Load
Edit
Load the list settings to the unit
Edit the list files
Program
Load the step settings to the unit
Edit the step files
PLD Testing
Load
Edit
Load the program settings to the unit
Edit the program files
Step
Load
Edit
5.2 Main Screen
In the MAIN screen shows after power up or whenever the [Main] key is pressed. It displays
the output settings and measurement in the top portion of the screen. The measurement are
displayed with much bigger characters, so they can be read from a large distance.
The sink function information are visible in the lower portion of the screen in Power+Sink mode.
At the bottom of the screen, a status bar is visible.
1
2
3
4
Special Func
Test Mode
LV Mode
Short Mode
Mcurr Share
Counting Func
Timer Func
GO/NG testing function
Enable this to reduce the low voltage ripple
Short-circuit protection setting
Current sharing for power modules
Current/Voltage counter test
Timer control
