Unpacking
09
2.4 Product Damage or Failure Repair
!
Caution!
2.3 Checking for Shipping Damage
All APM Technologies Company products have undergone stringent testing before delivery, but
inevitably damage can happen during transportation. Once you receive the product, please
immediately check if there is any packaging damage that may indicate damage to the product.
If you find damage related to product delivery, please immediately notify the transport company.
Make sure to take photos documenting the damage to the product, and send them to us so
that we can provide you with the best service.
In the unlikely event of product failure, please promptly contact APM Technologies or its dealer
and provide the serial number of the faulty DC power supply, detailed fault information and
pictures to help us identify the cause of the failure. If the power source requires repairing at the
factory or repair center, please pack it in the original packing material. Please assure to contact
APM to receive prior authorization for the product return and return instructions.
The handles on the front panel are for sliding in and out of the cabinet NOT for carrying.
08
Unpacking
1
2
Unpacking
2.1 Scope of delivery
Item Included
Quantity
Item
A
C
D
E
B
1
Power supply device
1
set
Screws to install Rack mount Handles
1
RS232 Serial Cable
USB Cable
1
2
Rack mount Handles (removable)
PROFESSIONAL
INNOVATIVE BRANDING
SERVICE
PROFESSIONAL
INNOVATIVE BRANDING
SERVICE
The following accessories are included with each DC power supply. See table below for
reference.
2.2 Options
Item Included
Quantity
Item
H
I
J
G
1
LAN & GPIB communication card
1
GPIB Cable
1
CAN communication card
Remote I/O control and monitor card
1
1
LAN Cable
K
L
1 set
Rack-mount slide kit and screws
Continuous source & sink function
*
As ordered
*
This option must be specified at the time of order as they are installed at the factory prior to shipment.
Because of its weight, transport by hand should be avoided where possible. If unavoidable
then only the housing should be held and not on the exterior parts (handles, input/output
terminals or rotary knobs).
F
Quick Guide
1
M
