Enter 55 End
*/$%ENTR* *ZEND*
Establish a Bluetooth Connection
5
Step
2
Initiate the process to pair the scanner with third-party Bluetooth dongle.
2-1.
Please switch to Bluetooth mode. Choose one of two alternatives listed below to help you
achieve the attempt.
When the current mode indicator does not flash blue, please
hold Scan Button long enough to
have LED light turn a solid color. Then, after a release of Scan Button, you can tell which
operation mode it switches to by observing LED color.
Repeat the steps printed in bold if
blue LED does not blink after releasing the Scan Button.
Scan the below barcode.
2-2.
Pair your scanner with third-party Bluetooth dongle by either of two options suggested below.
After holding small trigger till blue LED starts blinking rapidly, press down Scan Button
without releasing Small Trigger. Then releasing Scan button and Small trigger at the same time
will initiate the pairing process.
Scan the below barcode.
*ZTOB*
To BT Mode
ZTOB
*ZPAR*
BT Pairing
ZPAR
IMPORTANT:
In order to pair the scanner with iPad, please make sure that scanner always
stays in Bluetooth mode and awaits a Bluetooth connection by an indication of a steadily
flashing blue light. If the scanner is being put into sleep, press down Scan Button or Small
Trigger to wake up the scanner; or, repeat
Step 2-2
when the timeout period expires.
*/$%ENTR*
ENTER
/$%ENTR
*/$%ENTR*
ENTER
/$%ENTR
