Enter 259 End
*/$%ENTR* *ZEND*
Configuring Symbology
8
Procedure
(1)
Scan
Enter
barcode.
(2)
Scan
MinLength
barcode to set the minimum code length if necessary. Otherwise,
skip Steps (2)-(4)
(3)
Please refer to ASCII Code Table and Decimal/Hexadecimal Table in the appendix
to scan decimal value barcodes representing the desired number in the range of 0 to
255. For instance, to set its code length to be 2, scan
2
to assign the specified
decimal value “2”.
(4)
Scan
SET
barcode to complete the variable-binding operation.
(5)
Scan
MaxLength
barcode and then repeat Steps (3)-(4) to set the maximum code
length, if necessary.
(6)
Scan
End
barcode to complete the configuration.
8-10-9.
Remove Leading Characters
Truncate Lead
parameter allows you to specify the number of characters which you intend
to remove forwards from the start of Codabar barcode. In doing so, you are able to format
the decoded message beforehand by taking out the necessary barcode parts and preserve the
desired segments for your benefit. Follow the below procedure to complete the
configuration.
(Length: 1 digit / Range: 0-255)
*DD4E0*
TrunLead
DD4E0
(Length: 1 digit/ Range: 0-255)
*DD3E0*
MaxLength
DD3E0
*DD2E0*
MinLength
DD2E0
(Length: 1 digit/ Range: 0-255)
