Enter 253 End
*/$%ENTR* *ZEND*
Configuring Symbology
8
8-9-7.
Remove Trailing Characters
TrunEnd
parameter allows you to specify the number of characters which you intend to
remove backwards from the end of Matrix 2 of 5 barcode. In doing so, you are able to format
the decoded message beforehand by taking out the necessary barcode parts and preserve the
desired segments for your benefit. Follow the below procedure to complete the
configuration:
Procedure
(1)
Scan
Enter
barcode.
(2)
Scan
TrunEnd
barcode to specify the number of characters to delete backwards from
the end of the decoded data.
(3)
Please refer to Decimal/Hexadecimal Table in the appendix to scan decimal value
barcodes representing the desired number in the range of 0 to 255. For instance, to
remove the last two digits out of every Matrix 2 of 5 symbol, then scan
2
to assign
the specified decimal value “2”.
(4)
Scan
SET
barcode to complete the variable-binding operation.
(5)
Scan
End
barcode to complete the configuration.
8-9-8.
Set Position for Inserting Custom Info
Ins0Pos
and
Ins1Pos
parameters allow you to specify the specific position within a barcode
to insert your own custom message as to better format barcode data. However, to have the
mentioned future take effect, the group of parameters in this section necessarily pairs up with
that in
Section 8-9-10
which further demonstrates how to define what contains in inserted
information. Please be advised that
Ins0Pos
has to work with
Ins0PosChar
and
Ins1Pos
with
Ins1PosChar
.
*E36E0*
Ins0Pos
E36E0
(Length: 1 digit / Range: 0-255)
*E37E0*
Ins1Pos
E37E0
(Length: 1 digit / Range: 0-255)
*E35E0*
TrunEnd
E35E0
(Length: 1 digit / Range: 0-255)
