Enter 195 End
*/$%ENTR* *ZEND*
Setting up your Operation Modes
7
Procedure
(1)
Scan
Enter
barcode.
(2)
Scan
DelimiterChar
barcode to configure the delimiter.
(3)
Please refer to ASCII Code Table and Decimal/Hexadecimal Table in the appendix
to scan hexadecimal value barcodes representing the desired string which has to be
1 character in length. For instance, to use “;” character to break down the output
string, scan
3
first and then
B
to assign the specified hexadecimal value “3B”.
(4)
Scan
SET
barcode to complete the variable-binding operation.
(5)
Scan
End
barcode to complete the configuration.
7-4-3-18.
Set Delimiter Between Date and Time Stamps
Delimiter refers to a specified character or a set of characters used to divide lengthy
transit data into a group of data. By associating the parameter with the valid value, the
specified delimiter will be interposed between date and time stamps to have transmitted
data better formatted. However, to make sure this parameter functions properly, please
refer to
Section 7-4-3-12
and
Section 7-4-3-13
to enable date and time stamps as well.
Procedure
(1)
Scan
Enter
barcode.
(2)
Scan
DateTimeSpareChar
barcode to configure the delimiter.
(3)
Please refer to ASCII Code Table and Decimal/Hexadecimal Table in the appendix
to scan hexadecimal value barcodes representing the desired string which has to be
1 character in length. For instance, to use “;” character to break down the output
string, scan
3
first and then
B
to assign the specified hexadecimal value “3B”.
(4)
Scan
SET
barcode to complete the variable-binding operation.
(5)
Scan
End
barcode to complete the configuration.
*C6BE2*
DelimiterChar
C6BE2
(Length: 1 digit)
(Length: 1 digit)
*C6AE2*
DateTimeSpareChar
C6AE2
