Enter 23 End
*/$%ENTR* *ZEND*
Quick Start
4
4-3-2.
Transmit All Barcode Data
Button Trigger
1.
Secure the interface cable to both the barcode reader and the Host PC Open the preferred
word processing software to receive the scanned data.
2.
After holding Small Trigger long enough to trigger off a solid LED light, release Small
Trigger.
3.
While the orange LED starts flashing rapidly, press Scan Button once again to transmit all
barcode data.
Scan Sequence
Scan
Data Memory Tx
barcode after reading
Enter
label.
4-3-3.
Clear All Saved Barcode Data
Button Trigger
1.
Configure the scanner to be in Memory mode.
2.
While holding Small Trigger till orange LED starts blinking rapidly, press down Scan
Button.
3.
Release Scan Button and Small Trigger.
Scan Sequence
First read
Enter
label, and then scan the following barcode:
4-3-4.
Clear One DingleBarcode Data
Button Trigger
1.
Configure the scanner to be in Memory mode.
2.
Press down Small Trigger and scan the barcode you want to remove from the flash
memory.
*ZFCA*
Data Memory Clear
ZFCA
*ZMTX*
Data Memory Tx
ZMTX
