![background image](http://html1.mh-extra.com/html/amx/modero-nxd-1200v/modero-nxd-1200v_operation-reference-manual_2938937075.webp)
Configuring Communication
63
NXD/T-1200V Wall/Flush Mount Touch Panel
7.
Press the
Back
button to open the Protected Setup page.
8.
Press the on-screen
Reboot
button to both save any changes and restart the panel.
Master Connection section - NetLinx Master Ethernet IP Address - Listen Mode
In this mode, you must add the Modero panel IP Address into the URL List of the Master (using NetLinx Studio). This
mode sets the Modero panel to "listen" for broadcasts from the Master (using the panel IP from its URL list).
1.
Obtain either a Static IP for the Modero panel (from your System Administrator) or a DHCP Address from the IP
Settings of the System Settings page.
The
DHCP/Static
field (in the IP Settings section of the System Settings page) must be set to
DHCP
to get
Dynamic IP information for the panel.
Press the on-screen
Reboot
(from the Protected Setup page) to both save any changes and restart the panel.
After power-up, press the grey Front Setup Access button for
3 seconds
to access the Setup page.
Navigate to the
Setup > Protected Setup > System Settings
page and note the newly obtained Dynamic IP
Address information from the IP Settings section. This information is then entered into the URL List for the
connected NetLinx Master.
2.
Toggle the blue
Type
field until
Ethernet
is selected (
from the Master Connection section of the System Settings
page
).
3.
Press the
Mode
field (to set the connection Mode) until the choice cycles to the word
Listen
.
4.
Enter a username and password (
into their respective fields
) if the target Master has been previously secured.
5.
Select the
OnLine Tree
tab from the Workspace window.
6.
Select
Diagnostics
>
URL Listing
from the Main menu (FIG. 66).
7.
Enter the
System
and
Device
number for the specific Master associated with your panel (
as seen in the Online Tree
tab
).
8.
Click
Add
and enter the IP Address of the Modero touch panel into the
Add URL
dialog box.
9.
Click
OK
to enter your IP Address and add it to the list.
10.
Click
Done
once you are finished adding your panel information to the list.
11.
Press the on-screen
Reboot
button to save any changes and restart the panel.
Master Connection section - NetLinx Master Ethernet IP Address - Auto Mode
In this mode, enter the System Number of the NetLinx Master. This mode instructs the Modero to search for a Master
that uses the same System Number (assigned within the Master Connection section) and
resides on the same Subnet as
itself.
1.
Toggle the blue
Type
field until
Ethernet
is selected (
from the Master Connection section of the System Settings
page
).
2.
Press the
Mode
field until the choice cycles to the word
Auto
.
3.
Press the
System Number
field to launch a Keypad and enter the value for the system number of the NetLinx Master.
This value can be obtained from the NetLinx Studio program > OnLine Tree of the Workspace window.
FIG. 66
URL List dialog
System Address
reflects the value
set in the Device
Addressing tab
Used to obtain an
existing URL
Used to set the
URL List
List from Master
on Master
Summary of Contents for Modero NXD-1200V
