AMX Modero NXD-1200V, Operation/Reference Manual

Page: 100 / 176

Firmware Pages and Descriptions
88 NXD/T-1200V Wall/Flush Mount Touch Panel
Video Adjustment - Video Adjustment Page
The Video Adjustment page (FIG. 89) ( accessed by pressing the Video Adjustment button on the Setup page and then
selecting the appropriate button from the option bar ) sets the Video properties of the incoming video signal from an
NXA-AVB/RGB Breakout Box.
The elements of the Video Adjustment page are described in the table below:
FIG. 89 Video Adjustment page (showing default values)
Video Adjustment Page Elements
Back: Saves the changes and returns you to the previously active touch panel page.
Connection Status icon: This visual display of the connection status allows the user to have a current visual update of
the panel’s connection status regardless of what page is currently active.
• A Lock only appears on the icon if the panel has established a connection with a currently
secured target Master ( requiring a username and password ).
Settings: • The Default Settings button sets the video settings to their default values (indicated in
this table).
• The Undo Changes button disregards any changes made on the page since the last
settings were saved.
• The Save Settings button saves any changes made to this page.
Video Settings: • The Black & White button toggles the Black & White display mode. Default = Off.
• The Sharpness button toggles the Interpolate (Sharpness) feature. Default = On.
• The Interlace button toggles the Interlacing feature. Default = On.
Status: Displays whether or not a video-sync signal is detected.
Format: Allows you to press this blue field and cycle through a choice of available video formats ( NTSC ,
PAL , SECAM , or Auto detect ).
• Default = Auto.
Brightness: Use the UP/DN buttons to alter the brightness level of the incoming signal.
• Range = 0 - 255, default = 128.
Contrast: Use the UP/DN buttons to alter the contrast level of the incoming signal.
• Range = 0 - 255, default = 128.
Saturation: Use the UP/DN buttons to alter the color saturation level of the incoming signal.
• Range = 0 - 255, default = 128.
Hue: Use the UP/DN buttons to alter the hue level of the incoming signal.
• Range = 0 - 255, default = 128.
Incoming Video signal
Once done making your screen
adjustments, SAVE SETTINGS.