AMX Modero NXD-1200V, Operation/Reference Manual

Page: 113 / 176

Firmware Pages and Descriptions
101 NXD/T-1200V Wall/Flush Mount Touch Panel
Wireless Settings Page Elements (Cont.)
Wireless Settings (Cont.):
Generate (Passphrase) Pressing the Generate button displays an on-screen keyboard which allows you to enter a
passphrase and then AUTOMATICALLY generate all four WEP keys which are compatible
only among Modero panels.
Note: The code key generator on Modero panels use the same key generation formula.
Therefore, this same Passphrase generates identical keys when done on any Modero
because they all use the same Modero-specific generator. The Passphrase generator is
case sensitive.
• Take these WEP keys and enter them into the target WAP. When also working with
multiple panels, these WEP Keys ( identical across all Modero panels ) must be
entered manually into the target WAP.
• Once all panels have been setup in this way, these WEP keys can then be entered
into the associated Wireless Access Point for ease of installation.
• The Passphrase generator is unique to Modero panels. The Key generator on these
Modero panels are specific and do not generate the same keys as other external
non-AMX wireless devices.
- Example: If you enter the word
apple into the Passphrase generator on a
3rd-party Wireless Access Point, it comes back with 1a:2b:3c:4d:etc.
Entering the same
apple in the Passphrase generator of any Modero panel
generates a different key: a1:b2:c3:d4:etc. Only AMX Modero panels generate the
same Current Key by using a unique Passphrase key generation technology. A
Current Key string, when generated anywhere else, will not match those created on
the Modero panels.
Note: The code key generator on Modero panels use the same key generation
formula.The passphrase generator is case sensitive.
Default Key Cycles through the four available WEP key identifiers in order to select a WEP key to use.
As the Default Key value is altered (through selection) the
corresponding Current Key is displayed. Each of these corresponds to a WEP key.
• This feature is useful for accessing different networks without having to
re-enter that networks’ WEP key.
• It is also sometimes used to set up a rotating key schedule to provide an extra layer
of security.
WEP Keys This feature provides you with another level of security by selecting a Key value.
• A single button is available for each WEP key up to a maximum of four keys.
• Pushing any of these buttons brings up an on-screen keyboard. Keys should be
entered in hexadecimal notation. It is common practice for every two characters
(representing a single byte) to be separated by a colon.
• Press Done to accept any changes and save the new value.
• Ex: 01:0A:67:F3:56 , although this is not necessary and the key may be entered by
omitting the colons. A 64-bit key will be 10 characters in length while a 128-bit key
will be 26 characters in length. The length of the key entered determines the level of
WEP encryption employed. Either 64-bit or 128-bit.
• 128-bit keys may also be entered and are used if supported by the internal wireless
card.
Current Key Displays the current WEP key in use. Keys may also be examined by touching the key
buttons and noting the keyboard initialization text.
• When working with a single panel and a single WAP, it is recommended that you
manually enter the Current Key from the WAP into the selected WEP Key.
• When working with a single WAP and multiple panels, it is recommended that you
generate a Current Key using the same passphrase on all panels and then enter the
panel-produced WEP key manually into the Wireless Access Point.
Channel The RF channel being used for connection to the WAP ( read -only ).
• This is determined through the WAP.