Amada HF-2500A, Operation Manual, Page: 141 / 164

APPENDIX E. COMMUNICATIONS
HF-2500A HIGH FREQUENCY WELD CONTROL
990-371 E-19
Command
SCHEDULE schedule_number <crlf>
ENG1 weld_energy <crlf>
FEEDBACK1 { KA | V | KW } <crlf>
ENG2 weld_energy <crlf>
FEEDBACK2 { KA | V | KW } <crlf>
SQUEEZE squeeze_time <crlf>
UP1 weld_time <crlf>
WELD1 weld_time <crlf>
DOWN1 weld_time <crlf>
COOL weld_time <crlf>
UP2 weld_time <crlf>
WELD2 weld_time <crlf>
DOWN2 weld_time <crlf>
HOLD hold_time <crlf>
RINDEX1 resistance_index<crlf>
RINDEX2 resistance_index<crlf>
EINDEX1 energy_index<crlf>
EINDEX2 energy_index<crlf>
<lf>
Control State Any
Description Reports the settings of the currently loaded Power Supply schedule parameters. The
schedule_number variable identifies which schedule is currently loaded, and may be any value
from 0 to 99.
squeeze_time and hold_time are the parameter that defines the time for the given period in 1
msec. Valid range is from 0 to 999.
weld_time is equivalent to 0.01 for Increments from 0.1 to 0.99 ms and increments of 0.1 ms for
1.0 to 9.9 ms and increments of 1.0 ms for 10.0 to 99.0 msec. (see table below)
HOST POWER SUPPLY
Increments Range Time Range Increments
0.01 0.1 - 0.99 0.1 - 0.99 ms 0.01 ms
0.1 1.00 - 9.90 1.0 - 9.9 ms 0.1 ms
1.0 10.00 - 99.0 10.0 - 99.0 ms 1 ms