Amada HF-2500A, Operation Manual, Page: 132 / 164

APPENDIX E. COMMUNICATIONS
HF-2500A HIGH FREQUENCY WELD CONTROL
E-10 990-371
Command SYSTEM {READ | SET} <crlf>
[ parameter_name value <crlf>]
<lf>
Control State Any
Description
Provides control over the Power Supplies system parameters. When used with the " READ "
keyword, all system parameters are returned (see SYSTEM under Power Supply Originated
Commands). When used with the " SET " keyword, the host may set (change) the value of one
or more of the system parameters.
The following is a list of valid literal substitutions for the parameter_name and value variables:
LIGHT { light_value } LCD contrast
LOUDNESS { loudness_value } Buzzer Loudness
BUZZER { OFF | ON } end of cycle buzzer
DISPLAY { PEAK | AVG } Display mode
SWSTATE { switch_state } Input Switch Type
CTSTATE { switch_state } Control Signals Type
FIRESW { AUTO | REMOTE | NONE } Firing Switch Type
GRAPH { OFF | ON } Update Graph
WELDABORT { OFF | ON } Footswitch weld abort
DEBOUNCE { NONE | 10 | 20 | 30 } Switch debounce time in
msec
These parameters pertain to the settings of the option menus available via the front panel user
interface.
light_value is a number 0 to 100 for brightness of the LCD. 0 is dark and 100 is the
brightest.
loudness_value is a number 0 to 100 for buzzer loudness. 0 is off and 100 is the loudest.
switch
_state: { MECHOPEN | MECHCLOSED | OPTOOPEN | OPTOCLOSED
| PLC0V | PLC24V}