Amada HF-2500A, Operation Manual, Page: 140 / 164

APPENDIX E. COMMUNICATIONS
HF-2500A HIGH FREQUENCY WELD CONTROL
E-18 990-371
WELD STATUS CODES
Number Status Message
65 SCHEDULES ARE RESET
66 SYSTEM PARAMETERS ARE RESET
67
PULSE 1 LOWER LIMIT REACHED
68 PULSE 1 UPPER LIMIT REACHED
69 WELD TIME TOO SMALL
70 NOT USED
71
CURRENT2 > UPPER LIMIT
72 CURRENT2 < LOWER LIMIT
73 VOLTAGE2 > UPPER LIMIT
74 VOLTAGE2 < LOWER LIMIT
75
POWER2 > UPPER LIMIT
76 POWER2 < LOWER LIMIT
77 RESISTANCE2 > UPPER LIMIT
78 RESISTANCE2 < LOWER LIMIT
79
INHIBIT 2ND PULSE
80 WELD STOP - LIMIT REACHED
81 SYSTEM ERROR: BUS ERROR
82 SYSTEM ERROR: SOFTWARE INTERRUPT
83
SYSTEM ERROR: ILLEGAL INSTRUCTION
84 SYSTEM ERROR: DIVIDED BY ZERO
85 SYSTEM ERROR: SPURIOUS INTERRUPT
86 COOL TIME MINIMUM
87
TEST WELD? [MENU]=NO [RUN]=YES
88 NOT USED
89 NOT USED
90 NOT USED
91
NOT USED
92 NOT USED
Command SCHEDULE schedule_number <crlf><lf>
Control State Any
Description Returns the current schedule number to the host. Schedule_number may be any number from 0
to 99.