2.1.1 Pre-installation Inspection
1.
Remove the power supply from the shipping container. Confirm the power supply, including the Precision
Temperature Sensor and all other ordered options, are included.
2. During shipping, components might shift. Carefully inspect the power supply and other contents for possible
shipping-related failures, such as loosened or damaged connectors. If any items are damaged or missing, contact
Alpha Technologies or the shipping company immediately. Most shipping companies have a short claim period.
3.
Do not attempt to install a power supply without first passing a complete pre-installation inspection.
2.1 Installation Procedure
The Alpha XM3-HP CableUPS can be shelf-mounted within a variety of Alpha enclosures and secured with an internal
tamper-resistant security screw kit. The installer must read and follow all safety instructions starting on page 9 and the
preliminary inspection below prior to installation of the power supply.
2.0 Installation
2.1.2 Internal Security Screw Kit Installation
The XM3-HP Power Supply security screw kit provides the hardware for securing the power supply to its enclosure. The
security key for the included security screw is
NOT
in the installation kit and must be purchased separately from Alpha.
The customer may supply their own tamper resistant/security fastener if desired.
Required Materials:
•
Security Screw Kit, p/n 746-316-20
•
Alpha-01 Security Key, p/n 647-188-10
•
3/8" Hand Drill
•
13/32" (#Y) Drill Bit
• Center Punch
•
3/8" Socket and Torque Wrench
Use the original shipping container if the power supply needs to be returned for service. If the original container is not
available, make sure the unit is well packed with at least three inches of shock-absorbing material to prevent shipping
damage. Use single shipment packaging (Alpha p/n 966-639-10 or 966-640-10) to return ship a damaged power
supply. If necessary, palletize shipment to protect power supply.
NOTICE
:
•
Only qualified service personnel should perform this procedure.
• Use
EXTREME CAUTION
when drilling into the enclosure. Clear all equipment, wiring, and
batteries from the area into which you are drilling.
• Lead-acid batteries contain dangerous voltages, currents and corrosive material.
WARNING! ELECTRICAL HAZARD
Read the Safety Precautions, Utility Power Connection Notes and Grounding Connection Notes (pages
9-15) before installing the power supply.
CAUTION!
Do not use popcorn-type material. Alpha Technologies is not responsible for damage caused by
improper packaging of returned units.
CAUTION!
• This security enhancement is available on the XM3-HP with a manufacturing code of 2013 and newer.
•
Enclosure and power supply unit may differ slightly from the figures. Use as reference only.
NOTICE
:
39
017-882-B0-001 Rev. E (06/2018)
