40
017-882-B0-001 Rev. E (06/2018)
2.0 Installation, Continued
Kit Includes:
A. 3/4" x 1/4" Aluminum Spacer, p/n 640-174-10
B. 1-1/2" SS Flat Washer, p/n 633-015-12
C. 5/16-18 X 1" SS Security Screw, p/n 647-189-12
(*) – Customer may supply their own tamper resistant/
security fastener. If so, do not use kit supplied screw.
Not Included (w/ Internal Security Screw Kit):
D. Alpha 01 Security Screw Key, p/n 647-188-10
D
B
C
A
Installation Procedure:
1.
Locate the security screw mounting location on the XM3-HP power supply (see Fig. 2-2).
2. Mark the location of the XM3-HP security screw hole on the enclosure shelf.
3.
Using the 13/32" drill bit, drill the hole for the security screw. Remove all metal shavings from the enclosures.
4. Position the 1/4" aluminum space over the hole (use the center punch to locate the spacer directly over the hole).
5. Position the XM3-HP power supply with the security hole over the drilled hole and spacer (use the center punch to
hold the spacer in place while situating the power supply) (see Fig. 2-3).
6.
Install the 5/16-18 X 1" SS Security Screw and 1-1/2" SS Flat Washer from the underside of the shelf. If installing the
supplied 5/16-18 X 1" SS Security Screw, torque to 26 ft-lbs (35.2 Nm). If installing a different security screw, follow
the manufacturer’s recommendations for torque.
Power Supply Bottom View
Fig. 2-1, Required Materials
Security Screw
Mounting Location
1/4" Spacer
SS Washer
Security Screw
Fig. 2-2, Security Screw Mounting Location
Fig. 2-3, Power Supply/Enclosure Shelf Security Screw Stack Up
