66
017-882-B0-001 Rev. E (06/2018)
2.0 Installation, Continued
2.2.15 Verifying Power Supply and Battery Parameters
Click the
General
menu to access power supply and individual battery voltage values. Important parameters such as
current alarm status, inverter status and tamper status can be quickly verified on this page. Additional power supply
parameters can be viewed and configured on the power supply page located in the
Advanced Configuration
menu, see
Figure 2-39.
Fig. 2-46, Power Supply and Battery Parameters
(data values shown for illustration purposes only)
Remote Self Tests on power supplies may be started and stopped via the DSM3/IDH4 Series Web page. This requires a
Level 1 login. Refer to
Section 2.2.12.1, Web Interface Security Levels
for User Name and Security Password.
To launch a remote Self Test, click on the
Start Test
button, see Figure 2-47.
To stop a remote Self Test before the predefined test duration, click on the
Stop Test
button.
2.2.16 Remote Self Tests via the Web Page
(data values shown for illustration purposes only)
Fig. 2-47, Location of "Start" Button for Self Test
