50
017-882-B0-001 Rev. E (06/2018)
2.0 Installation, Continued
Fig. 2-23, Front Panel Fastener Locations
Tools required:
#2 Phillips screwdriver
Procedure:
1. Remove the three fasteners securing
the front panel (see Fig. 2-23).
2. With the front panel open, install the
APPS card by pressing it firmly onto
the standoff (A) and fastening the
6-32 screw (B) (see Fig. 2-24).
3.
Connect the ribbon cable (C) and
ensure the locking clips are closed.
4.
Install the SAG card by pressing it
firmly onto the two standoffs (D) and
fastening the two 6-32 screws (E)
(see Fig. 2-25).
5.
Connect the ribbon cable (F) and
ensure the locking clips are closed.
6. Reinstall the front panel and secure
with the fasteners removed in Step 1.
2.2.5 Optional Smart AlphaGuard and Alpha APPS Installation
E
Remove all sources of power to unit before performing the following procedure.
WARNING! ELECTRICAL HAZARD
B
A
C
D
D
E
F
Fig. 2-24, APPS Card Standoff, Screw and
Ribbon Cable Locations
Fig. 2-25, SAG Card Standoffs, Screws and
Ribbon Cable Locations
