ALLIANCE ST3LXFSP401NW22, Programming Manual

Page: 98 / 102

802953 96 © Published by permission of the copyright owner – DO NOT COPY or TRANSMIT
Rapid Advance Feature
The Rapid Advance feature allows the owner to
quickly advance through active cycles or advance into
a cycle from the ready mode.
How to Enter Rapid Advance
1. If control is in Ready Mode, control must be put
into Manual Mode. Refer to Entering the
Manual Mode .
2. Press the NORMAL 40 ( ) or the DELICATES
COLD ( ) keypad until “ rAPd ” appears in the
display.
3. Press the START (enter) keypad. The display will
show “ PUSH ” then “ Strt ” followed by the cycle
time and the START (enter) keypad LED will
flash.
4. Press the START (enter) keypad to start cycle.
NOTE: Door must be closed to start cycle.
How to Enter Rapid Advance During
an Active Cycle
1. Be certain service door is open.
2. While pressing and holding the NORMAL 90
keypad with one hand, press the PERM PRESS
60 keypad with the other hand.
3. Press the NORMAL 40 ( ) or the DELICATES
COLD ( ) keypad until “ rAPd ” appears in the
display.
4. Press START (enter) to activate rapid advance
cycle.
Control may be in an active cycle or in the ready mode
to use the Rapid Advance feature.
While in the Rapid Advance Mode, pressing the
START (enter) keypad will advance the washer to the
next cycle step. The cycle indicator lights will tell
which cycle step the washer is in.
For Example: If the washer is in the first fill/agitate
cycle step, pressing the START (enter) keypad will
advance the washer into the Wash Drain/Distribute
cycle step.
Continue pressing the START (enter) keypad until the
cycle is completed.
How to Exit Rapid Advance Feature
1. Advance through the cycles until reaching the
ready mode.
NOTE: The Rapid Advance option must be turned
on for Rapid Advance to work. Refer to option 32
in Programming Control .
>
<
>
<