ALLIANCE ST3LXFSP401NW22, Programming Manual

Page: 79 / 102

© Published by permission of the copyright owner – DO NOT COPY or TRANSMIT
Programming Control
77
802953
25. Drop Off Mode (On/Off) “droP”
This option allows the owner to limit machine use to
an attendant without requiring vend.
How to Program the Drop Off Mode (On/
Off)
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode .
2. Press the NORMAL 40 ( ) or the DELICATES
COLD ( ) keypad until “ Prog ” appears in the
display. Press the START (enter) keypad and
“ AtS1 ” will appear in the display.
3. Press the NORMAL 40 ( ) or the DELICATES
COLD ( ) keypad to scroll through the
programmable options until “ droP ” appears in
the display.
4. When “ droP ” appears in the display, press the
START (enter) keypad. The current Drop Off
Mode (On/Off) Status will appear in the display.
“ on ” = Option Enabled
“ oFF ” = Option Disabled (factory default
setting)
When the Drop Off Mode is enabled, starting the
machine requires the correct sequence of four keypad
presses. The default sequence programmed at the
factory is NORMAL 90, NORMAL 60, NORMAL 40,
SOIL LEVEL.
5. Press the NORMAL 40 ( ) or the DELICATES
COLD ( ) keypad to change the current status.
6. Press the START (enter) keypad when the
desired status appears in the display. The next
option, “ LPSA ”, will appear in the display.
NOTE: To program “LPSA” (Low Power/Auto
Shutdown A Days Enable), refer to option 26 . To
program other options, refer to the appropriate
section.
How to Exit Programming Feature
Press the DELICATES 30 (<) keypad until the control
returns to Ready Mode.
26. Low Power/Auto Shutdown A
Days Enable “LPSA”
This option allows the owner to set Low Power/Auto
Shutdown on certain day(s) of the week. Low Power
or Auto Shutdown duration are programmed using an
external device or network.
How to Program the Low Power/Auto
Shutdown A Days Enable
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode .
2. Press the NORMAL 40 ( ) or the DELICATES
COLD ( ) keypad until “ Prog ” appears in the
display. Press the START (enter) keypad and
“ AtS1 ” will appear in the display.
3. Press the NORMAL 40 ( ) or the DELICATES
COLD ( ) keypad to scroll through the
programmable options until “ LPSA ” appears in
the display.
4. When “ LPSA ” appears in the display, press the
START (enter) keypad. The current Low Power/
Auto Shutdown A Days Enable status will appear
in the display.
“ on ” = Option Enabled
“ oFF ” = Option Disabled (factory default
setting)
5. Press the NORMAL 40 ( ) or the DELICATES
COLD ( ) keypad to change the current status.
6. Press the START (enter) keypad when the correct
status appears in the display. The next option,
“ LPSb ”, will appear in the display.
NOTE: To program “LPSb” (Low Power/Auto
Shutdown B Days Enable), refer to option 27 . To
program other options, refer to the appropriate
section.
How to Exit Programming Feature
Press the DELICATES 30 (<) keypad until the control
returns to Ready Mode.
>
<
>
<
>
<
>
<
>
<
>
<