802953
8
© Published by permission of the copyright owner – DO NOT COPY or TRANSMIT
Display Identification
Light Emitting Diodes (LEDs)
(Refer to
Figure 1.
)
LIGHT EMITTING DIODES (LEDs) are used to
indicate the chosen cycle, wash temperature, cycle
status and door lock information. See below for
information on each LED.
CYCLE LED
CYCLE
LED will remain lit the entire cycle.
WASH LED
WASH
LED
is lit at the beginning of a wash portion of
the cycle and will remain lit until the wash is
complete.
RINSE LED
RINSE
LED is lit at the beginning of a rinse portion of
the cycle and will remain lit until the rinse is complete.
SPIN LED
SPIN
LED
is lit during the Final Spin portion of the
cycle.
INSERT COINS/CARD LED
INSERT COINS/CARD
LED
prompts the user for
coins or a card to satisfy the vend price. Four digits
show the vend price remaining to be satisfied. The
vend price displayed will decrease with each coin
inserted. If new options are selected during the first fill
step of the wash cycle and it requires additional vend,
the
INSERT COINS/CARD
light will flash one (1)
second on and one (1) second off, and the display will
show the vend price remaining to be satisfied.
DOOR LED
DOOR
LED is lit whenever the door is locked. The
door can’t be opened when this LED is lit.
A LED
A
LED is lit when the Option A soil level is selected.
B LED
B
LED is lit when the Option B soil level is selected.
C LED
C
LED is lit when the Option C soil level is selected.
Four 7-Segment Digits
The 7-SEGMENT DIGITS are used to display the
time remaining in a cycle, vend price, error messages
and descriptive codes. During diagnostic testing or
manual programming of the control, these digits will
display descriptive codes and values (as described in
Entering the Manual Mode
).
Summary of Contents for ST3LXFSP401NW22
Page 2: ......
