ALLIANCE ST3LXFSP401NW22 Programming Manual Download Page 68

Page: 68 / 102

Programming Control

802953

20. Special Vend B Days Enable

“SPb-”

This option allows the owner to enable or disable a

second special vend.
Special Vend B can be programmed using an external

device or network.

How to Program Special Vend B Days
Enable

1. Control must be in Manual Mode. Refer to

Entering the Manual Mode

2. Press the NORMAL 40 ( ) or the DELICATES

COLD ( ) keypad until “

Prog

” appears in the

display. Press the START (enter) keypad and

“

AtS1

”

will appear in the display.

3. Press the NORMAL 40 ( ) or the DELICATES

COLD ( ) keypad to scroll through the

programmable options until “

SPb-

” appears in

the display.

4. When “

SPb-

” appears in the display, press the

START (enter) keypad. The current Special Vend

B Days Enable status will appear in the display.

“

” = Option Enabled

“

oFF

” = Option Disabled (factory default

setting)

5. Press the NORMAL 40 ( ) or the DELICATES

COLD ( ) keypad to change the current status.

6. Press the START (enter) keypad when the correct

status appears in the display. The next option,

“

SPC-

”, will appear in the display.

NOTE: To program

“SPC-”

(Special Vend C Days

Enable), refer to

option 21

. To program other

options, refer to the appropriate section.

How to Exit Programming Feature

Press the DELICATES 30 (<) keypad until the control

returns to Ready Mode.

21. Special Vend C Days Enable

“SPC-”

This option allows the owner to enable or disable a

third special vend.
Special Vend C can be programmed using an external

device or network.

How to Program Special Vend C Days
Enable

1. Control must be in Manual Mode. Refer to

Entering the Manual Mode

2. Press the NORMAL 40 ( ) or the DELICATES

COLD ( ) keypad until “

Prog

” appears in the

display. Press the START (enter) keypad and

“

AtS1

”

will appear in the display.

3. Press the NORMAL 40 ( ) or the DELICATES

COLD ( ) keypad to scroll through the

programmable options until “

SPC-

” appears in

the display.

4. When “

SPC-

” appears in the display, press the

START (enter) keypad. The current Special Vend

C Days Enable status will appear in the display.

“

” = Option Enabled

“

oFF

” = Option Disabled (factory default

setting)

5. Press the NORMAL 40 ( ) or the DELICATES

COLD ( ) keypad to change the current status.

6. Press the START (enter) keypad when the correct

status appears in the display. The next option,

“

SPd-

”, will appear in the display.

NOTE: To program

“SPd-”

(Special Vend D Days

Enable), refer to

option 22

. To program other

options, refer to the appropriate section.

How to Exit Programming Feature

Press the DELICATES 30 (<) keypad until the control

returns to Ready Mode.

Summary of Contents for ST3LXFSP401NW22







































































































Search results

Summary of Contents for ST3LXFSP401NW22

Reviews:

Related manuals for ST3LXFSP401NW22

Brands by name

Popular brands

ALLIANCE ST3LXFSP401NW22, Programming Manual

Search results

Summary of Contents for ST3LXFSP401NW22

Reviews:

Related manuals for ST3LXFSP401NW22

Brands by name

Popular brands