Special Features
802953
12
© Published by permission of the copyright owner – DO NOT COPY or TRANSMIT
Service Door and Coin Vault
Openings
The control will capture the times and dates of the
openings of the Coin Vault and the Service Door. The
information is saved in memory. An open service door
combined with various keypad presses allows the
control to enter manual modes of operation if the
Break-In Alarm is not on. These modes include Manual
Programming, Audit Collection and Diagnostics.
Break-In Alarm
This feature allows the owner to program the machine
to signal a network alarm, cause a machine alarm or
shut down the machine if the service door or coin vault
is opened without disabling the alarm first. The date
and time of the break-in is recorded. To avoid the
alarm during coin collections, the alarm must be
turned off or temporarily disabled by pressing the two
programmed keys.
The alarm is turned off by default. The alarm can be
turned on by programming the control with an external
device or network.
Special Vend
This feature allows the owner to program the control
to allow programmable vend prices for specific hours
and dates.
For details on programming Special Vend, refer to
Programming Control
.
OPL Mode
This feature allows the user to start a cycle without
satisfying the vend price.
For details on enabling OPL Mode, refer to
Programming Control
.
Drop-Off Mode
This feature allows the owner to limit machine use to
an attendant without requiring vend. Starting the
machine will require the correct sequence of four
keypad presses as programmed by an external device,
card reader or network.
For details on enabling Drop-Off Mode, refer to
Programming Control
.
Low Power/Auto-Shutdown Option
This feature allows the owner to program the control
to shut down or enter a low power consumption mode
based on programmable times and dates if either of
these options are enabled.
For details on programming the Low Power/Auto-
Shutdown option, refer to
Programming Control
.
Temperature Display
This feature allows the owner to view the water
temperature on the display by pressing the keypad of
the active cycle during the fill or agitate step of the
cycle.
The temperature display is turned off by default. The
feature can be turned on by programming the control
with an external device or network.
Summary of Contents for ST3LXFSP401NW22
Page 2: ......
