ALLIANCE ST3LXFSP401NW22, Programming Manual

Page: 96 / 102

802953 94 © Published by permission of the copyright owner – DO NOT COPY or TRANSMIT
Error Codes
The following table is a list of possible error codes for
an electronic control. Errors beginning with “EI” refer
to external device Infra-red communication errors.
Errors beginning with “EC” refer to card reader errors.
All other errors refer to machine errors.
Display Description
Cause/
Corrective Action
EI01 Transmission Failure Communication failure. Re-aim external device and try
again.
EI02 Time-out Error Communication failure. Re-aim external device and try
again.
EI03 Invalid Command Code Communication successful, but the command was not
valid for this machine type, or the control could not
perform the command in its current mode of operation.
Ensure data is for current machine type and control is in
correct mode.
EI04 Expecting Upload Request Communication failure. Re-aim external device and try
again.
EI05 Invalid or Out-of-Range Data The value in at least one of the programming options is
invalid or out of range. Recheck the programming
option’s value and try again.
EI09 CRC-16 Error Communication failure. Re-aim external device and try
again.
EI0A Framing Error Communication error. Re-aim external device and try
again.
EI0C Time-out Exceeded Communication error. Re-aim external device and try
again.
EI0E Encryption Error Communication error. Re-aim external device and try
again. If the problem persists, check that the security
code is correct.
EI0F Infra-red Disabled Communication failure or infra-red is disabled.
Manually enable infra-red on control or re-aim external
device and try again.
EC02 Time-out Error Communication failure. Try card again.
EC03 Invalid Command Code Communication successful, but the command was not
valid for this machine type, or the control could not
perform the command in its current mode of operation.
Ensure data is for current machine type and control is in
correct mode.
EC05 Invalid or Out-of-Range Data The value in at least one of the programming options is
invalid or out of range. Recheck the programming
option’s value and try again.
EC11
No Card Reader Initialization Communication is valid, but there is no card reader
initialization. Power down, power up and try again.
Table 19 (continued)