ALLIANCE ST3LXFSP401NW22 Programming Manual Download Page 76

Page: 76 / 102

Programming Control

802953

How to Program Cycle #2 Time “PCt2”

This option allows the owner to set the Cycle #2 Time

display.

1. Press the NORMAL 40 ( ) or the DELICATES

COLD ( ) keypad to scroll through the

programmable Cycle Time Display options until

“

PCt2

” appears in the display.

2. When “

PCt2

” appears in the display, press the

START (enter) keypad. The current Cycle #2

Time is displayed.

3. Press the NORMAL 40 ( ) or the DELICATES

COLD ( ) keypad to increase or decrease the

current number of minutes to the desired number

of minutes.

NOTE: The Cycle #2 Time can be set from 0 to 255.

The factory default setting is 34.

4. Press the START (enter) keypad when the

desired number of minutes appears in the display.

5. The next Cycle Time Display option, “

PCt3

”,

will appear in the display.

NOTE: To program

“PCt3”

(Cycle #3 Time),

continue to next Cycle Time Display option. To

program other options, press the DELICATES

30 (<) keypad and refer to the appropriate section.

How to Exit Programming Feature

Press the DELICATES 30 (<) keypad until the control

returns to Ready Mode.

How to Program Cycle #3 Time “PCt3”

This option allows the owner to set the Cycle #3 Time

display.

1. Press the NORMAL 40 ( ) or the DELICATES

COLD ( ) keypad to scroll through the

programmable Cycle Time Display options until

“

PCt3

” appears in the display.

2. When “

PCt3

” appears in the display, press the

START (enter) keypad. The current Cycle #3

Time is displayed.

3. Press the NORMAL 40 ( ) or the DELICATES

COLD ( ) keypad to increase or decrease the

current number of minutes to the desired number

of minutes.

NOTE: The Cycle #3 Time can be set from 0 to 255.

The factory default setting is 32.

4. Press the START (enter) keypad when the

desired number of minutes appears in the display.

5. The next Cycle Time Display option, “

PCt4

”,

will appear in the display.

NOTE: To program

“PCt4”

(Cycle #4 Time),

continue to next Cycle Time Display option. To

program other options, press the DELICATES

30 (<) keypad and refer to the appropriate section.

How to Exit Programming Feature

Press the DELICATES 30 (<) keypad until the control

returns to Ready Mode.

Summary of Contents for ST3LXFSP401NW22







































































































Search results

Summary of Contents for ST3LXFSP401NW22

Reviews:

Related manuals for ST3LXFSP401NW22

Brands by name

Popular brands

ALLIANCE ST3LXFSP401NW22, Programming Manual

Search results

Summary of Contents for ST3LXFSP401NW22

Reviews:

Related manuals for ST3LXFSP401NW22

Brands by name

Popular brands