ALLIANCE ST3LXFSP401NW22 Programming Manual Download Page 77

Page: 77 / 102

Programming Control

802953

How to Program Cycle #4 Time “PCt4”

This option allows the owner to set the Cycle #4 Time

display.

1. Press the NORMAL 40 ( ) or the DELICATES

COLD ( ) keypad to scroll through the

programmable Cycle Time Display options until

“

PCt4

” appears in the display.

2. When “

PCt4

” appears in the display, press the

START (enter) keypad. The current Cycle #4

Time is displayed.

3. Press the NORMAL 40 ( ) or the DELICATES

COLD ( ) keypad to increase or decrease the

current number of minutes to the desired number

of minutes.

NOTE: The Cycle #4 Time can be set from 0 to 255.

The factory default setting is 31.

4. Press the START (enter) keypad when the

desired number of minutes appears in the display.

5. The next Cycle Time Display option, “

PCt5

”,

will appear in the display.

NOTE: To program

“PCt5”

(Cycle #5 Time),

continue to next Cycle Time Display option. To

program other options, press the DELICATES

30 (<) keypad and refer to the appropriate section.

How to Exit Programming Feature

Press the DELICATES 30 (<) keypad until the control

returns to Ready Mode.

How to Program Cycle #5 Time “PCt5”

This option allows the owner to set the Cycle #5 Time

display.

1. Press the NORMAL 40 ( ) or the DELICATES

COLD ( ) keypad to scroll through the

programmable Cycle Time Display options until

“

PCt5

” appears in the display.

2. When “

PCt5

” appears in the display, press the

START (enter) keypad. The current Cycle #5

Time is displayed.

3. Press the NORMAL 40 ( ) or the DELICATES

COLD ( ) keypad to increase or decrease the

current number of minutes to the desired number

of minutes.

NOTE: The Cycle #5 Time can be set from 0 to 255.

The factory default setting is 28.

4. Press the START (enter) keypad when the

desired number of minutes appears in the display.

5. The next Cycle Time Display option, “

PCt6

”,

will appear in the display.

NOTE: To program

“PCt6”

(Cycle #6 Time),

continue to next Cycle Time Display option. To

program other options, press the DELICATES

30 (<) keypad and refer to the appropriate section.

How to Exit Programming Feature

Press the DELICATES 30 (<) keypad until the control

returns to Ready Mode.

Summary of Contents for ST3LXFSP401NW22







































































































Search results

Summary of Contents for ST3LXFSP401NW22

Reviews:

Related manuals for ST3LXFSP401NW22

Brands by name

Popular brands

ALLIANCE ST3LXFSP401NW22, Programming Manual

Search results

Summary of Contents for ST3LXFSP401NW22

Reviews:

Related manuals for ST3LXFSP401NW22

Brands by name

Popular brands