ALLIANCE ST3LXFSP401NW22 Programming Manual Download Page 67

Page: 67 / 102

Programming Control

802953

How to Program Special Vend A Added
Wash #4 Fill/Agitate Time “SA20”

This option allows the owner to add time to the wash

agitate part of the cycle in Special Vend A.

1. Press the NORMAL 40 ( ) or the DELICATES

COLD ( ) keypad to scroll through the

programmable Special Vend A options until

“

SA20

” appears in the display.

2. When “

SA20

” appears in the display, press the

START (enter) keypad.

3. Press the NORMAL 40 ( ) or the DELICATES

COLD ( ) keypad to increase or decrease the

number of minutes displayed to the desired

number of added minutes.

NOTE: The Special Vend A Added Wash Agitate

Time can be set from zero “0” to 15 minutes.

4. Press the START (enter) keypad when the correct

number of minutes appears in the display. The

next Special Vend A option, “

SA21

”, will appear

in the display.

NOTE: To program “

SA21

” (Special Vend A

Subtracted Wash Agitate Time), continue to next

Special Vend A option. To program other options,

press the DELICATES 30 (<) keypad and refer to

the appropriate section.

How to Exit Programming Feature

Press the DELICATES 30 (<) keypad until the control

returns to Ready Mode.

How to Program Special Vend A
Subtracted Wash #4 Fill/Agitate Time
“SA21”

This option allows the owner to subtract time from the

wash agitate part of the cycle in Special Vend A.

1. Press the NORMAL 40 ( ) or the DELICATES

COLD ( ) keypad to scroll through the

programmable Special Vend A options until

“

SA21

” appears in the display.

2. When “

SA21

” appears in the display, press the

START (enter) keypad.

3. Press the NORMAL 40 ( ) or the DELICATES

COLD ( ) keypad to increase or decrease the

number of minutes displayed to the desired

number of subtracted minutes.

NOTE: The Special Vend A Subtracted Wash

Agitate Time can be set from zero “0” to 15

minutes.

4. Press the START (enter) keypad when the correct

number of minutes appears in the display. The

next Special Vend A option, “

SA01

”, will appear

in the display.

NOTE: To program

“SPb-”

(Special Vend B

Enable), press the DELICATES 30 (<) keypad and

refer to

option 20

. To program other options refer

to the appropriate section.

How to Exit Programming Feature

Press the DELICATES 30 (<) keypad until the control

returns to Ready Mode.

Summary of Contents for ST3LXFSP401NW22







































































































Search results

Summary of Contents for ST3LXFSP401NW22

Reviews:

Related manuals for ST3LXFSP401NW22

Brands by name

Popular brands

ALLIANCE ST3LXFSP401NW22, Programming Manual

Search results

Summary of Contents for ST3LXFSP401NW22

Reviews:

Related manuals for ST3LXFSP401NW22

Brands by name

Popular brands