© Published by permission of the copyright owner – DO NOT COPY or TRANSMIT
11
802953
Special Features
Programming Control
The control allows the washer owner to program the
control with the use of the keypad. Cycle and vend
options may be programmed, audit information may
be viewed and diagnostic tests may be run by pressing
combinations of the Select Cycle pads.
For details on programming cycle and vend options,
refer to
Programming Control
.
Collecting Audit Information
The control stores audit information in its memory that
can be retrieved by pressing various combinations of
Select Cycle pads. The control will record coins
entered, total machine cycles, and total start pulses.
For more information on the audit features, refer to
Collecting Audit Information
.
NOTE: Additional audit information is retrievable
with an external device, the card reader and the
network. Refer to the appropriate instruction
manual.
Testing Machine and Control
Functions
Special diagnostic features built into the control allow
the owner to run specific diagnostic tests. By opening
and closing the service door and then pressing various
sequences of Select Cycle pads, the owner may
perform the following tests:
Control Software Version Number
Service Door Opening Test
Coin Vault Opening Test
Coin Drop #1 Input Test
Coin Drop #2 Input Test
Door Switch Input Test
Door Lock Switch Input Test
Pump/Gravity Drain Test
Show Fill Time Test
Temperature Sensor Display Test
Start Pulse Test
Configuration #1 Display Test
Configuration #2 Display Test
For detailed information on running diagnostic tests,
refer to
Testing Machine and Control Functions
.
Rapid Advance Feature
This feature allows the user to quickly advance
through active cycles or advance into a cycle from the
ready mode. This feature is useful when tests must be
performed immediately on a washer currently in an
active cycle. In this case, the user can quickly advance
through the cycles to the ready mode. At this point, the
user can perform the required tests and then return the
washer to the point it was interrupted.
For detailed information on using the Rapid Advance
feature, refer to
Rapid Advance Feature
.
Clearing the Vend Feature
This feature allows the user to return the control back
to the ready mode if coins have been entered but the
full vend price has not yet been satisfied.
For more information on using the Clear Vend feature,
refer to
Clear Vend Feature
.
Communications Mode
This feature allows the washer control to communicate
with an external device, the card reader, or the
network. This allows the washer control to be
programmed and have its data read without using the
keypad.
For more detailed information on using the
Communications Mode feature, refer to
Communications Mode
.
Coin Drop
The control will accept pulses from a single or dual
coin drop to satisfy vend price. Each coin drop will
have the ability to start a cycle.
Start Pulse Operation
The control will accept pulses from optional payment
systems. The machine can be programmed to receive a
single start pulse or multiple start pulses, or the Start
Pulse Option can be turned off. The Start Pulse Mode
allows the machine to go from the Ready Mode to the
Start Mode after a single pulse or multiple pulses are
received.
Summary of Contents for ST3LXFSP401NW22
Page 2: ......
