WebServer application
GasEye Cross Duct
Operating instructions, 05/2021
157
In order to change the value or setting of chosen parameter the user shall click on the
field that intends to change i.e. optical path length. By clicking on the light blue box
the edition mode is activated. The value is changed by typing in the new value.
To apply changes click on the
Send
button that will appear next to the edited field.
The same method applies to a drop-down menu changes. Dark blue background
indicates that the value has been changed but has not been applied yet.
If changes where made the
Send&Save
button becomes active. By clicking it the
changes are permanently stored in the analyzer firmware.
Drop-down menu will appear when clicking on the
Parameters.
Figure 159. Webserver application - parameters Window.
Download parameters setting
Current
parameter
list
can
be
downloaded to a *.txt file.
Read parameters from file
Previously saved parameter list can be
read from a *.txt file.
Send & Save
Current parameter list is saved and sent
to the instrument.
Send parameters
All parameters that have been changed
are sent at once. Number in oval
indicates the number of parameters that
will be applied.
Table 27. Parameter Window functionalities.
