HMI – front panel display
134
GasEye Cross Duct SG and MG
Operating instructions, 05/2021
Editing network settings
Network settings can be changed in the NETWORK SETTINGS category.
Figure 122. Front panel display - Editing network settings.
IP, subnet mask, and gateway address configuration are similar to usual parameter
editing but holding Enter button quits editing mode without saving. To confirm the
changes, press Enter when the cursor is on the last digit, and select “Yes”, “No”, or
“repeat config”.
Figure 123. Front panel display – Editing IP address
Figure 124. Front panel display – IP address confirmation
