Airoptic GasEye, User Manual

Page: 123 / 254

HMI – front panel display
GasEye Cross Duct
Operating instructions, 05/2021
123
Menu
The user has access to the menu from the HMI level. The user can display
measurements, parameters and IOs (Inputs/Outputs). The menu structure looks as
follows.
Figure 100. Main menu overview.
Main Menu
 Settings
 Network Settings

IP address
 Mask
 Gateway
 Parameters
 Optical path length 1 (Path1)
 Optical path length 2 (Path2)
 T90
 Diagnostic

HMI version
 Host version
 Measurements
 Gas 1

Gas 2
 Gas 3
 Gas 4
 Gas 5
 Gas 6
 Gas 7
 Gas 8
 Temperature calculated (TEMCAL)

Fiber 1 transmission (F1TR)
 Fiber 2 transmission (F2TR)
 Remote RX1 gain (RX1G)
 Remote RX2 gain (RX2G)

Process temperature (PrTemp)
 Process pressure (PrPres)
 Laser1 transmission (Trans1)
 Laser2 transmission (Trans2)
 Laser3 transmission (Trans3)
 Laser4 transmission (Trans4)
 System startup procedure (SUP)
 Reference 1 (REF1)

Reference 2 (REF2)
 Reference 3 (REF3)
 Reference 4 (REF4)
 Analog input

Analog input 1
 Analog input 2
 Analog input 3
 Analog input 4
 Analog output
 Analog output 1
 Analog output 2
 Analog output 3

Analog output 4