HMI – front panel display
122
GasEye Cross Duct SG and MG
Operating instructions, 05/2021
HMI – front panel display
On the lid of the transmitter unit there is an LCD display, which allows monitoring of
pre-defined measurements and editing essential parameters. The user can access
and toggle between the menu positions using the buttons that are placed beneath the
display.
Overview
Front panel of device has an alphanumerical display 4x20 (4 rows 20 columns), three
buttons and two LEDs (Figure ).
Figure 98. Front panel display.
Upon connection of the power
supply the display will light up and
show a welcome message with
host version which is followed by
the Main Menu page. During the
start-up procedure the red LED will
flash until the procedure is
completed. It takes approximately
6 minutes to complete the
initialization.
Figure 99. Welcome message with Host software version.
