General information about the analyzer
GasEye Cross Duct
Operating instructions, 05/2021
11
Analyzer arrangement
GasEye Cross Duct SG mechanical assembly
The GasEye Cross Duct SG (Single Gas) analyzer consists of a pair of cross-duct
sensors - a central unit with transmitter and a receiver unit. The central unit emits
laser radiation directly through the process containing the constituents of interest. The
receiver unit collects the radiation on the other side of the process duct. The receiver
unit is connected to the transmitter unit by means of a hybrid loop cable (included).
The GasEye Cross Duct utilizes an internal in-line reference gas cell or a process gas
(e.g. H2O) for real time verification of the calibration status.
Figure 2 shows the GasEye Cross Duct assembly with external mechanical parts
description.
Figure 2. GasEye Cross Duct SG instrument assembly.
ID
Name
A1
Receiver unit housing (GasEye integral part)
A2
Cable glands/ purging connectors
A3
PE connector
A4
Receiver/central unit tube (GasEye integral part)
A5
Sanitary clamp
A6
Alignment flange
A7
Gaskets
A8
Purging tubes
A9
Central unit housing
Table 1. Descriptions of GasEye Cross Duct instrument assembly.
