Aimco AcraDyne Gen IV iAC Operation Manual Download Page 2

Page: 2 / 68

AcraDyne Gen IV iAC Controller Manual

Table of Contents

1. Safety Information . . . . . . . . . . 3
2. Controller Diagram . . . . . . . . . . 4

2.1 Bottom Panel iAC Basic Model . . . . . 4

2.2 Bottom Panel iAC Models with Shutoff

Valve and/or Regulator. . . . . . . . 4

2.3 Top Panel iAC Models with Shutoff Valve

and/or Regulator . . . . . . . . . . 5

2.4 Front Console LED Display . . . . . . . 5

3. Initial Setup. . . . . . . . . . . . . 6

3.1 Air and Electrical Connections . . . . . 6

3.2 Interfacing with the Controller . . . . . 7

3.3 Enter Tool Information into the Controller . . 9

3.4 Quick Set Up (Default PSets from Tool). . . 9

4. Home Page (Main Menu) . . . . . . . . 10

4.1 Run . . . . . . . . . . . . . . 10

4.2 PSet . . . . . . . . . . . . . . 12

4.2.1 Add New PSet . . . . . . . . . 12

4.2.1.1 Add New Stage . . . . . . 12

4.2.2 PSet Stages . . . . . . . . . . 13

4.2.2.1 TC_PM Torque Control Pulse

Monitor . . . . . . . . . 13

4.2.2.2 TC_APM Torque Control Angle

Pulse Monitor . . . . . . . 14

4.2.2.3 TC_AM Torque Control Angle

Monitor . . . . . . . . . 15

4.2.2.4 AC_TM Angle Control Torque

Monitor . . . . . . . . . 15

4.2.3 Edit PSet . . . . . . . . . . . 16

4.2.4 Advanced Options . . . . . . . 16

4.2.5 Manage PSets . . . . . . . . . 17

4.2.6 Multistage Rundown Evaluation and

Reporting . . . . . . . . . . . 18

4.3 Job . . . . . . . . . . . . . . 18

4.3.1 Add New Job . . . . . . . . . 18

4.3.2 Advanced Options . . . . . . . 19

4.3.3 Jobs "Enabled" Display and Button

Function . . . . . . . . . . . 19

4.4 Results . . . . . . . . . . . . . 20

4.4.1 Saving Rundown(s) . . . . . . . 20

4.5 Controller . . . . . . . . . . . . 21

4.5.1 Tool Setup . . . . . . . . . . 21

4.5.1.1 Tool Parameters . . . . . . 21

4.5.1.2 Disassembly

. . . . . . . . 22

4.5.1.3 Lock Tool On Reject . . . . . 22

4.5.2 IO . . . . . . . . . . . . . 23

4.5.2.1 Physical IO . . . . . . . . 23

4.5.2.2 Physical IO Monitor . . . . . 23

4.5.2.3 Anybus/Modbus TCP/Ethernet IP

Inputs . . . . . . . . . . 24

4.5.2.4 Anybus/Modbus TCP/Ethernet IP

Outputs . . . . . . . . . 25

4.5.3 Communication Interfaces . . . . . 26

4.5.3.1 Ethernet . . . . . . . . . 26

4.5.3.2 Second Ethernet . . . . . . 26

4.5.3.3 System Port . . . . . . . . 26

4.5.3.4 Serial . . . . . . . . . . 27

4.5.3.5 Anybus. . . . . . . . . . 27

4.5.3.6 Serial USB . . . . . . . . . 27

4.5.4 Protocols . . . . . . . . . . . 29

4.5.5 Front Panel Buttons . . . . . . . 29

4.5.6 Power Up . . . . . . . . . . . 29

4.5.7 Bar Code Setup . . . . . . . . 29

4.5.8 Set Time . . . . . . . . . . . 30

4.5.9 Remote Connections . . . . . . . 30

4.5.10 Languages . . . . . . . . . . 30

4.6 Accessories . . . . . . . . . . . 31

4.7 Diagnostics . . . . . . . . . . . . 31

4.7.1 Controller Overview . . . . . . . 31

4.7.2 Controller Status . . . . . . . . 31

4.7.3 Live Tool . . . . . . . . . . . 32

4.7.4 Indicators . . . . . . . . . . . 32

4.7.5 Identify Controller . . . . . . . . 32

4.7.6 Record Logs . . . . . . . . . . 33

4.7.6.1 Change Log . . . . . . . 33

4.7.6.2 Information Log . . . . . . 33

4.7.6.3 Error Log . . . . . . . . . 33

4.7.6.4 All . . . . . . . . . . . 33

4.7.7 System Status . . . . . . . . . 33

4.7.8 I/O Diagnostics . . . . . . . . . 33

4.7.9 Network Diagnostics . . . . . . . 33

4.8 Login . . . . . . . . . . . . . . 34

4.9 Advanced . . . . . . . . . . . . 34

4.9.1 Login Setup . . . . . . . . . . 34

4.9.2 Results Archive . . . . . . . . . 35

4.9.3 Import Settings . . . . . . . . . 36

4.9.4 Export Controller . . . . . . . . 36

4.9.5 Update Controller . . . . . . . . 36

4.9.6 Backup Restore . . . . . . . . . 37

4.9.7 Restore Factory Defaults. . . . . . 37

4.9.8 Previous Software . . . . . . . . 38

4.9.9 Calibrate Touch Screen . . . . . . 38

4.9.10 Soft Reboot . . . . . . . . . . 38

5.  Barcode Reader Details    .    .    .    .    .    .    .    . 39
6.  Glossary of Terms.    .    .    .    .    .    .    .    .    .    . 41
7.  Icons Defined  .       .       .       .       .       .       .       .       .       .       .       . 42
8.  Stop Codes.    .    .    .    .    .    .    .    .    .    .    .    . 43
9.  Error Codes.    .    .    .    .    .    .    .    .    .    .    .    . 44
10. 24 Volt I/O   .       .       .       .       .       .       .       .       .       .       .       .       . 45

10.1 Port Pinout and Diagrams . . . . . . . 45

10.2 24 Volt I/O Connections . . . . . . . 45

11. Assignable I/O . . . . . . . . . . . 47

11.1 Controller Supported MIDs. . . . . . . 59

12. Open Protocol Message IDs   .    .    .    .    .    .    . 60
13. Dimensions .    .    .    .    .    .    .    .    .    .    .    .    . 61
14. Specifications  .       .       .       .       .       .       .       .       .       .       .       . 61
15. Troubleshooting   .    .    .    .    .    .    .    .    .    .    . 62
16. AIMCO Warranty  .       .       .       .       .       .       .       .       .       .       . 64

Summary of Contents for AcraDyne Gen IV iAC





































































Search results

Summary of Contents for AcraDyne Gen IV iAC

Reviews:

Related manuals for AcraDyne Gen IV iAC

Brands by name

Popular brands

Aimco AcraDyne Gen IV iAC, Operation Manual

Search results

Summary of Contents for AcraDyne Gen IV iAC

Reviews:

Related manuals for AcraDyne Gen IV iAC

Brands by name

Popular brands