Aimco AcraDyne Gen IV iAC, Operation Manual

Page: 56 / 68

56
AcraDyne Gen IV iAC Controller Manual
PFCS Connected Supported Feature
Bus Element
Bit
0-32
Polarity
N.O./N.C.
Mode
Normal, Timed, Flash Time Width Offset
Input
Bus
Input
Element
Input
Bit
√ √ √ √ √
The “PFCS Connected” output assignment will be active if the controller has an active PFCS connection.
Running PSet Number Supported Feature
Bus Element
Bit
0-32
Polarity
N.O./N.C.
Mode
Normal, Timed, Flash Time Width Offset
Input
Bus
Input
Element
Input
Bit
√ √ √ √ √
The “Running PSet Number” output assignment will output the current PSet number.
Running Job Number Supported Feature
Bus Element
Bit
0-32
Polarity
N.O./N.C.
Mode
Normal, Timed, Flash Time Width Offset
Input
Bus
Input
Element
Input
Bit
√ √ √ √ √
The “Running Job Number” output assignment will output the current Job number.
External Controlled Supported Feature
Bus Element
Bit
0-32
Polarity
N.O./N.C.
Mode
Normal, Timed, Flash Time Width Offset
Input
Bus
Input
Element
Input
Bit
√ √ √ √ √ √
The “External Controlled” output assignment will reflect the state of an input. Use the “Input Bus, “Input
Element”, and “Input Bit” to specify the input to reflect.
Tool In CCW Supported Feature
Bus Element
Bit
0-32
Polarity
N.O./N.C.
Mode
Normal, Timed, Flash Time Width Offset
Input
Bus
Input
Element
Input
Bit
√ √ √ √ √
The “Tool In CCW” output assignment will be active if the tool is put into disassembly mode and inactive if the
tool is in assembly mode.
Tool In CW Supported Feature
Bus Element
Bit
0-32
Polarity
N.O./N.C.
Mode
Normal, Timed, Flash Time Width Offset
Input
Bus
Input
Element
Input
Bit
√ √ √ √ √
The “Tool In CW” output assignment will be active when the is in assembly mode and inactive if the tool is put
into disassembly mode.
Torque Supported Feature
Bus Element
Bit
0-32
Polarity
N.O./N.C.
Mode
Normal, Timed, Flash Time Width Offset
Input
Bus
Input
Element
Input
Bit
√ √ √ √
The “Torque” output assignment will output the final torque value of the most recent rundown. The value will
be cleared to 0 at the start of a new fastening cycle or a Job reset. At the end of the fastening cycle the final
torque will be truncated to an integer and output.
Torque (x10) Supported Feature
Bus Element
Bit
0-32
Polarity
N.O./N.C.
Mode
Normal, Timed, Flash Time Width Offset
Input
Bus
Input
Element
Input
Bit
√ √ √ √
The “Torque (x10)” output assignment will output the final torque value of the most recent rundown. The value
will be cleared to 0 at the start of a new fastening cycle or a Job reset. At the end of the fastening cycle the
final torque will be multiplied by 10, truncated to an integer and output.