操作说明
Operator Instruction
6
车门
Door
车门采用异型材门框，内镶整块曲面玻璃，与整个流线型驾驶室融为一体，既衬托出宽敞舒适的驾驶空
间，又使整车美观性大大提高。车门开启时
(
见图
)
，顺时针转动车门钥匙
90°
，取下钥匙后，用手抓住
车门把手，大拇指向里推压件
1
，车门锁即被打开，同时向外拉动把手，车门即打开。关闭车门时，反
向操作即可将车门锁上。
The doorframe adopts profiled bar, inside is glazed with mono block curved glass, which blend well with the
steamlined cab. On one hand, it accentuates the
capacious and comfortable driving space; on the other
hand, it greatly improves the beauty of the entire
tractor. When the door opens, rotate 90 degrees of the
door key clockwise.
After removing the key, grab the doorknob use the
thumb to push the compression element 1, the door
lock is unlocked; at the same time, pull the knob
outward, the door is opened. When closing the door,
lock the door in reverse order.
图
4-33
驾驶室门锁
Figure 4-33 Door lock of the cab
1.
钥匙
2.
门锁
3.
推杆
4.
锁定板
5.
开锁手柄
6.
门把手
1. door key; 2.door lock; 3. push rod;
4. locking plate; 5.unlocking handle;
6. door handle
5
驾驶室内饰
The Cab interior
驾驶室内饰包括挡泥板内饰、地板垫、仪表台、内顶衬
等，如图所示。
Interior decoration of the cab includes interior decoration of
the Fender, floor mat, instrumentation console and roof
lining, etc, asshow in Figure 4-32.
图
4-32
驾驶室内饰
Fig. 4-32 Interior decoration of the cab
