操作说明
Operator Instruction
转向开关
Steering switch
“0”
位:接通右转向灯。
“1”
位:切断电源。
“2”
位:接通左转向灯。
Position "1": left steering lamps on; position "0": power supply off; Position "2": right
steering lamps on.
危险报警开关
Warning switch for danger
“1”
位:前后左右转向灯、仪表上的左右转向灯及危险报警开关上的指示灯均
亮。当拖拉机因故障停在公路上或其他原因需要警告前后车辆和行人引起注意,
以避免。发生事故时,使用此功能。
Front/rear and left/right steering lamps, left/right steering lamps on instrument and indicator on danger alarming
switch are lit. When the tractor stops on the road because of fault or other reasons, it is required to warn other
vehicles and passengers about it to avoid any incident. Now this function is used.
夜间照明开关
Lighting switch at night
“1”
位:所有开关上的指示灯仪表照明灯全亮。
“0”
位:各指示灯灭。用于夜间
行驶时,照明各开关。
All indicator lamp on the switch and instrument lamp are lit Position "0": each indicator
off. To control the double-action oil cylinder on the machinery.
右侧翘板开关组合
Right rocker switch combination
1
.夜间照明开关
1.
lighting switch at night;
2.
危险报警开关
2.
warning switch for danger;
3.
转向开关
3.
steering switch
图
4-7
左侧翘板开关组合
Fig. 4-7right rocker switch combination