Agilent Technologies G1313A, Reference Manual

Page: 272 / 292

272
Specifications
Performance Specifications
Table 64 Performance Specifications Agilent 1100 Series Thermostatted Micro Autosampler
(G1389A)
7\SH 6SHFLILFDWLRQ
Sample capacity 100 x 2 ml vials in 1 tray. Microvials (100 or 300 µl) with
sleeves (reduced cooling performance with microvials)
Settable injection
volume 0.01 to 8 µl with small loop capillary
0.01 to 40 µl with extended loop capillary
Precision Typically < 0.5 % RSD from 5 to 40 µl
Typically < 1 % RSD from 1 to 5 µl
Typically < 3 % RSD from 0.2 to 1 µl
Minimum sample
volume 1 µl from 5 µl sample in 100 µl microvial, or 1 µl from
10 µl sample in 300 µl microvials
Carryover Typically < 0.1 % without automated needle wash
Typically < 0.05 % with external needle cleaning and 1 µl
injection volume
Sample viscosity range 0.2 - 5 cp
Recommended
pH-range 1.0 - 8.5 solvent with pH < 2.3 should not contain acids
which attack stainless steel. Upper pH range is limited by
fused silica capillaries
Material in contact with
solvent Stainless steel, sapphire, PTFE, PEEK, fused silica,
Vespel
GLP features Early maintenance feedback (EMF), electronic records of
maintenance and errors
Communications Controller-area network (CAN). GPIB (IEEE-448),
RS232C, APG-remote standard, optional four external
contact closures and BCD vial number output
Safety features Leak detection and safe leak handling, low voltages in
maintenance areas, error detection and display
Housing All material recyclable