Agilent Technologies G1313A, Reference Manual

Page: 231 / 292

231
Theory of Operation
Interfaces
Interfaces
The Agilent 1100 Series modules provide the following interfaces:
• CAN connectors as interface to other Agilent 1100 Series modules,
• GPIB connector as interface to the Agilent ChemStation,
• RS-232C as interface to a computer,
• REMOTE connector as interface to other Agilent products,
• Analog Output connector(s) for signal output, and
• Interface slot for specific interfacing (external contacts, BCD, LAN and
so on).
For identification and location of the connectors Figure 6 on page 27.
WA R N I N G Never use cables other than the ones supplied by Agilent Technologies
to ensure proper functionality and compliance with safety or EMC
regulations, see “External Tray G1313-60004” on page 184.
Table 49 Agilent 1100 Series Interfaces
Interface Type Pumps Autosampler
DA Detector
MW Detector
FL Detector
VW Detector
RI Detector
Thermostatted
Column
Compartment
Vacuum
Degasser
CAN Yes Yes Yes Yes Yes No
GPIB Yes Yes Yes Yes Yes No
RS-232CYes Yes Yes Yes Yes No
Remote Yes Yes Yes Yes Yes Yes
Analog Yes No 2 × 1 × No
Yes
*
Interface board Yes Yes Yes Yes No No
*
The vacuum degasser will have a special connector for specific use. For details see description of main board.