34
S:\agilent\e8285\USRGUIDE\BOOK\CHAPTERS\getstart.fb
Chapter 1, Getting Started
Addressing
Addressing
Setting the Test Set Bus Address
The Test Set’s GPIB bus address is set using the
GPIB Adrs
field which is
located on the I/O CONFIGURE screen. The Test Set’s GPIB address is set to
decimal 14 at the factory. To set a different GPIB bus address; select the I/O
CONFIGURE screen and position the cursor next to the
GPIB Adrs
field. The
address can be set from decimal 0 to 30 using the numeric DATA keys, or by
pushing and then rotating the CURSOR CONTROL knob. There are no switches
for setting the GPIB bus address in the Test Set. The new setting is retained when
the Test Set is turned off.
Displaying the Bus Address
The Test Set’s GPIB bus address can be displayed by pressing and releasing the
Shift key, then the Local key. The address is displayed in the upper-left corner of
the display.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com