342
S:\agilent\e8285\USRGUIDE\BOOK\CHAPTERS\ibasic.fb
Chapter 6, IBASIC Controller
The TESTS Subsystem
The
Select Procedure Location:
field is used to select the mass storage
location for the procedure to be loaded. The
Select Procedure Filename:
field is used to select the name of the procedure to be loaded. The
Description:
field gives the user a brief description of the procedure currently selected in the
Select Procedure Filename:
field.
To view all the Procedures available on the mass storage location currently
selected in the
Select Procedure Location:
field, position the cursor on the
Select Procedure Filename:
field and push the rotary knob. A menu will
appear in the lower right corner of the screen, displaying all the procedure files
which are available. This is not a listing of the full contents of the selected mass
storage location, it is only a list of the procedures files that are stored on that
media.
TESTS Subsystem User-Interface Screens
The TESTS Subsystem allows the user to easily modify the test subroutines,
parameters, specifications and configuration to correspond to the requirements of
a specific radio. There are several user-interface screens provided to allow the
user to make modifications.
To access any of these screens, position the cursor on the desired field and push
the rotary knob.
•
The Order of Tests screen lets the user select the desired test(s) from the full set of avail-
able tests in the loaded procedure file.
•
The Channel Information screen defines the transmit and receive frequencies used for
the selected tests.
•
The Pass/Fail Limits screen defines the specifications used to generate pass/fail mes-
sages during testing.
•
The Test Parameters screen is used to define instrument settings and characteristics to
match those of the radio being tested (audio load impedance, audio power, power sup-
ply voltage, etc.).
•
The External Devices screen identifies all connected GPIB equipped instruments and
their GPIB addresses.
•
The Save/Delete Procedure screen is used to save or delete Procedures.
•
The Printer Setup screen is used to select the printer used for IBASIC PRINT com-
mands and to configure the format of the printer page.
•
The Execution Cond screen is used to configure the IBASIC program execution condi-
tions.
•
The IBASIC Cntrl screen is the IBASIC Controllers display screen.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com