150
S:\agilent\e8285\USRGUIDE\BOOK\CHAPTERS\hpibstat.fb
Chapter 4, Status Reporting
GPIB Status Register Groups
Communicate Status Register Group
The Communicate Status Register Group contains information about the Test
Set’s hardware, and the summary message bits for the Serial 1 and Serial 2 Status
Register Groups.
The Status Byte Register summary message associated with the Communicate
Status Register Group is bit zero. The Communicate Status Register Group SMB
must be enabled in the Hardware1 Status Register Group before any of the
following events or conditions can be reported through the Status Byte Register.
Figure 19
shows the structure and STATus commands for the Communicate Status
Register Group.
Table 12
shows the Communicate Status Register Group Condition Register bit
assignments.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com